- In a non-metallic dish, combine the full 1 oz. packet of One ‘n OnlyTM Argan Oil Powder Lightener.
- At the desired level, add 2 fl. oz. of One ‘n OnlyTM Argan Oil Cream Developer (10, 20, 30 or 40 volume).
How do you use powder lightener?
2. Wrap an old towel across your shoulders. Only the lower ponytail should be let down. Brush the surface well. If you like, you can use your fingers (while wearing gloves) instead of a brush. Brush the lightening mixture onto the ends of the hair in a tiny piece (no more than 2 inches/5cms broad). Apply the product with your fingers to the portion of hair where you want the balayage effect to begin. Make sure the product is well saturated by massaging it into the hair. Repeat for the entire bottom layer, then cover with foil or gently clip hair to the side (do not use any metal hair accessories) to prepare for the next ponytail. Allow the middle ponytail to fall down, brush it out, and continue the application process. Allow hair to fall naturally in place with your typical parting before adding the top ponytail. Complete the application process once more. The last layer does not require foil or a clip.
What is the ratio of powder lightener to developer?
Combine 1 scoop of dual-purpose lightener and 50gr/ml Cream Developer in a mixing bowl (1:2 ratio). 30gr/ml mix For on-scalp applications, use 45gr/ml of Cream Developer (1:1 1/2 ratio). 30gr/ml mix For off-scalp applications, lighten up with 30gr/ml Cream Developer (1:1 ratio).
How do you use powder and developer lightener?
Rubber gloves, a couple of brushes and bowls, a kitchen weighing scale, and a timer are all necessary application gear.
Ugly Duckling does sell a professional tool kit of decent quality. Some of Ugly Duckling’s blonding sets include them for free.
What Developer Should I Use with Bleach?
If you’re working with really dark hair, a first application with 30 Vol developer and then a second application with 20 Vol developer may be necessary. There’s no need to rinse and then bleach if you build a fresh combination and reapply it to bleached hair while it’s processing.
We do not encourage or require that you “kick up the Volume” and use 40 Volume with our bleaches. Simply follow the guidelines outlined above. If required, submit additional applications.
Use the level guide below to determine how much bleaching is required in your case and which developer you will use.
Remember that if you want to achieve ash or platinum blonde, you must elevate all the way to level 10.
What is the Correct Bleach to Developer Ratio?
1 part bleach to 2 parts developer is the optimum bleach-to-developer ratio.
It will be easier to cover all of the hair uniformly with our recommended “pretty runny” mix, eliminating uneven results.
You’ll be able to work more quickly as a result of it. This also means you have more time to work with the mixture before it dries.
The only time you’ll need a thicker, non-dripping combination is if you’re doing a balayage (free painting of highlights) or if you have a limited region to focus on, such as a dark regrowth.
How do I Mix the Bleach With the Developer?
To measure out the bleach, use the scoop that came with the Ugly Duckling bleach. Then you can measure out your developer with the same scoop.
With your color brush, mix the bleach until it produces a smooth consistency (similar to gravy).
This should be done in a plastic mixing bowl. Add a little of the developer to the powder bleach at a time, stirring constantly.
How Should I Apply the Bleach on the Hair?
Natural hair oils in unwashed hair help preserve the hair during the bleaching process.
Brush the hair before bleaching to make it easier to segment and apply.
When applying, use a tailcomb to produce fine segments. Apply segment by segment and move about as needed.
Always begin in the regions with the thickest or darkest hair. The hair in the back is the slowest to bleach.
How Long Should I Leave the Bleach on the Hair?
If your client’s hair is blonde (level 7 or higher), use a 20 Vol developer for 15-20 minutes.
If your client’s hair is dark blonde/light brown (level 5-6), use 30 Vol developer for roughly 30 minutes.
If your client’s hair is brown/dark brown (level 4-5), aim for 30-40 minutes of processing time with 30 Vol developer and new mix added in during the process.
The information above only applies to Ugly Duckling bleaches. Not all bleaches are the same when it comes to lifting ability.
Keep an eye on the hair and only rinse when it has been raised sufficiently.
Remember that you should aim for a very pale yellow – level 9 or 10 in most circumstances. Levels 9 and 10 are seen in the images below.
Make some more fresh mix and add it in if any parts are drying out and not yet raised to a very pale yellow color.
Be brave; you’ll need to thoroughly soak the hair in order for it to activate quickly and effectively.
Don’t rinse too soon – this is the most common error made by hairdressers! At the very least, get it to level 9. (see below).
Rinse after 40 minutes, regardless of the level. It’ll be dry anyway, and it’ll have ceased to function. (When the bleach becomes dry, it stops processing.)
You can do a second application if you haven’t reached level 9/10 and the hair is still in good condition (confirm by pulling a strand to see if it’s still elastic and strong).
Asian hair, Hispanic hair, and other dark hair may need a second bleaching to reach level 9 or level 10.
Hair that has previously been box dyed dark or colored with a vivid hue will need to be reapplied.
It should not be necessary to use 30 Vol while performing a second application. Use 20 volts this time.
Before you rinse, you must remove all of the orange pigments as well as the majority of the yellow pigments.
Rinse with an acidic shampoo once you’ve reached your desired level. After the bleaching process, this will close the hair cuticle.
Purple shampoo is also an option. This will assist to even out the color and remove some of the yellow.
Does 1 N only need developer?
Next, calculate the grayscale percentage. Decide on the desired brightness and shade. The proportions for mixing are 1:2. (1 part color for 2 parts developer).
Apply with a tint brush while wearing plastic gloves (or mix color with developer in an applicator bottle, shaking gently).
- Apply color to the hair’s shaft. (Note: if the ends are porous, don’t paint them through.)
- Work the remaining color through the ends and process for up to 5 minutes before the end of the processing period to refresh previously colored hair.
- Rinse, shampoo, and condition your hair after the color has developed. After a straightening or perm, wait one week before coloring your hair.
Complete a patch test beforehand
Complete a patch test before dyeing your hair at home. You could be allergic to something you’re not aware of.
A 16-year-old girl was brought to a burn hospital in 2012 after suffering a 1 percent full-thickness chemical burn on the nape of her neck as a result of bleaching.
Hair testing reveals whether or not your hair is too damaged for bleaching.
“Do not lighten your hair if the ends kink up, look frizzy, or ragged,” warns Kerry E. Yates, founder of Colour Collective and trichologist in training.
“Instead, choose a clear gloss to use to smooth things out till your ends are chopped off and your strands look more healthy.”
Read the directions carefully
Vincent De Marco, hairstylist and proprietor of Vincent Hair Artistry, advocates taking professional precautions such as using gloves and protective glasses.
Check the level of lightness on the hair, just as you would in a professional salon. According to Yates, the first check should be made after 10 minutes, and then every 5 to 10 minutes until you reach 30 minutes.
“If the results you want aren’t there after 30 minutes, rinse it out and mix a new batch,” Yates continues. “Use the same formula and follow the same instructions.”
Consider your hair type
Some hair types are just unable to resist the bleaching process. Yates advises against bleaching if you have relaxed, straightened, or chemically treated hair.
“This product is not for you, and if you use lightener, your hair will actually turn to dust,” Yates explains.
While bleach can be used on curly hair, you’ll want to go easy on it to protect your texture. When applying the product, don’t pull on the hair, for example.
Is hair lightener better than bleach?
Hair conditioning with cream lighteners is preferable because it is done at the same time as the highlighting. Cream lighteners, on average, lift up to 6 shades lighter, making them more potent lightening agents than many other color lifting solutions.
What is lift up powder lightener?
Lift Up Lightening Powder has a mild yet powerful mix that gives you the lift you need to look your best. A comfortable lifting sensation is provided by the maximum dedusted recipe.
Should I use 20 or 30 volume developer?
When lightening your hair, never use more than 30 volumes of developer because the chemical’s power can be too high and cause burns if it comes into contact with your scalp. Developers in the 30 volume range are often used on dark hair, whereas developers in the 10 and 20 volume range are used on naturally lighter hair.