Are you looking for a hair color that not only provides rich and luminous color but also nourishes and conditions your hair?
Look no further than argan oil hair color!
This advanced formula contains a unique complex of active conditioners and argan oil, which work together to provide superior shine and deep, intense color while minimizing damage to your hair.
But how do you use it?
In this article, we’ll walk you through the simple steps of mixing and applying argan oil hair color with 20 volume developer for stunning results.
So grab your tint bowl and let’s get started!
How To Use Argan Oil Hair Color 20 Volume?
Step 1: Gather Your Supplies
Before you begin, make sure you have all the necessary supplies. You will need the argan oil hair color cream and the 20 volume developer, both of which should come in the same package. You will also need a tint bowl, a tint brush, and gloves to protect your hands.
Step 2: Mix the Color and Developer
The mixing process is simple and straightforward. The ratio of hair color cream to developer is 1:2. For medium-length hair, mix 1 oz. of hair color cream with 2 oz. of developer for a total formula mixture of three oz. Use the markings on the side of the tubes to measure out the correct amount.
Start by pouring the developer into your tint bowl first, then add the hair color cream. Mix thoroughly until you have a smooth and consistent mixture.
Step 3: Apply the Color
Put on your gloves to protect your hands from staining. Using your tint brush, apply the mixture to your hair, starting at the roots and working your way down to the ends. Make sure to saturate your hair evenly with the mixture.
If you have gray hair or want maximum coverage, leave the color on for 45 minutes. For standard application, 30 minutes is enough.
Step 4: Rinse and Condition
After the recommended time has passed, rinse your hair thoroughly with warm water until the water runs clear. Apply a generous amount of conditioner to your hair and leave it on for a few minutes before rinsing it out.
And that’s it! With these simple steps, you can achieve stunning results with argan oil hair color and 20 volume developer. Not only will your hair look beautiful and vibrant, but it will also be nourished and conditioned thanks to the active conditioners and argan oil in the formula.
Gathering Your Supplies
Before you begin the process of coloring your hair with argan oil hair color and 20 volume developer, it’s important to gather all the necessary supplies. In addition to the hair color cream and 20 volume developer, which come in the same package, you will need a tint bowl and brush, gloves to protect your hands, a t-shirt or other clothing that you don’t mind getting color on, a towel, dye away wipes, and coconut oil or another protective cream for your hairline.
It’s important to be careful and avoid splattering dye on any porous surfaces, so make sure to set up your spot in an area that is easy to clean. Once you have all your supplies ready, you can move on to mixing the color and developer according to the instructions provided.
Choosing The Right Shade
Choosing the right shade of argan oil hair color is crucial to achieving the desired result. When selecting a shade, it is important to consider your natural hair color, skin tone, and personal preference.
If you are unsure about which shade to choose, start by selecting a shade that is no more than two shades lighter or darker than your natural hair color. This will help to ensure that the color blends seamlessly with your natural hair and looks natural.
If you have warm undertones in your skin, consider choosing a warm shade such as golden brown or honey blonde. For cool undertones, opt for cool shades such as ash brown or platinum blonde.
It is also important to consider the level of intensity you want in your color. If you are looking for a subtle change, choose a shade that is close to your natural hair color. If you want a more dramatic change, choose a shade that is significantly lighter or darker than your natural hair color.
Remember, it is always better to err on the side of caution when choosing a hair color. If you are unsure about which shade to choose, consult with a professional stylist or do a strand test before applying the color to your entire head.
Mixing The Color And Developer
To mix the argan oil hair color and 20 volume developer, you will need to follow a specific ratio. The mixing ratio is 1:2, which means one part hair color cream should be mixed with two parts developer. For medium-length hair, mix 1 oz. of hair color cream with 2 oz. of developer for a total formula mixture of three oz.
To begin, pour the developer into a tint bowl first, followed by the hair color cream. Mix the two thoroughly until you have a smooth and consistent mixture. It’s important to mix the color and developer right before application to ensure the best possible results.
Once you have your mixture ready, it’s time to apply it to your hair. Wearing gloves to protect your hands from staining, use a tint brush to apply the mixture to your hair, starting at the roots and working your way down to the ends. Be sure to saturate your hair evenly with the mixture.
For maximum gray coverage, leave the color on for 45 minutes. For standard application, 30 minutes is enough. After the recommended time has passed, rinse your hair thoroughly with warm water until the water runs clear.
To complete the process, apply a generous amount of conditioner to your hair and leave it on for a few minutes before rinsing it out. The active conditioners and argan oil in the formula will leave your hair looking gloriously healthy, with deep, intensely rich and luminous color.
Prepping Your Hair
Before applying argan oil hair color with 20 volume developer, it is important to prep your hair properly. First, make sure your hair is clean and dry. Do not use any styling products or conditioners before applying the color as they can interfere with the absorption of the color.
It is also important to protect your skin from the dye by applying a thin layer of petroleum jelly along your hairline and ears. This will prevent the dye from staining your skin.
If you have dark brown or almost black hair, you may want to consider pre-lightening your hair before using the argan oil hair color with 20 volume developer. This will help the color show up more vibrantly and prevent it from looking too dark.
To pre-lighten your hair, mix a lightening powder with a 20 volume developer in a tint bowl until you have a smooth and consistent mixture. Apply the mixture to your hair using a tint brush, starting at the ends and working your way up to the roots. Leave the mixture on for 30-45 minutes, depending on how light you want your hair to be.
After rinsing out the lightening mixture, follow the steps above to apply the argan oil hair color with 20 volume developer. By prepping your hair properly, you can achieve the best possible results with this product.
Applying The Color
Now that you have mixed the color and developer, it’s time to apply the mixture to your hair. Here’s how:
1. Section your hair: Divide your hair into four sections, starting from ear to ear and down the center of your head. This will make it easier to apply the color evenly.
2. Apply the color: Starting at the roots, use your tint brush to apply the mixture to your hair. Work your way down to the ends, making sure to saturate each section evenly with the color.
3. Leave the color on: Depending on whether you want maximum gray coverage or standard application, leave the color on for 45 minutes or 30 minutes respectively.
4. Rinse and condition: After the recommended time has passed, rinse your hair thoroughly with warm water until the water runs clear. Apply a generous amount of conditioner to your hair and leave it on for a few minutes before rinsing it out.
5. Style as desired: Once you have rinsed and conditioned your hair, you can style it as desired. Whether you choose to blow dry, straighten, or curl your hair, you can be confident that your hair will look beautiful and vibrant thanks to the nourishing properties of argan oil hair color.
Timing And Rinsing
Timing is crucial when using argan oil hair color and 20 volume developer. The recommended processing time for maximum gray coverage is 45 minutes, while standard application only requires 30 minutes. It is important to follow the processing time guidelines to achieve the desired results without damaging your hair.
After the recommended processing time has passed, rinse your hair thoroughly with warm water until the water runs clear. Make sure to remove all traces of the color mixture from your hair. Apply a generous amount of conditioner to your hair and leave it on for a few minutes before rinsing it out. This will help to restore moisture and nourishment to your hair, leaving it soft, shiny, and healthy.
It is important to note that you should always wait at least one week between chemical services, such as straightening or perming, before using argan oil hair color and 20 volume developer. This will give your hair time to recover and prevent any damage from occurring.
