Will Vinegar Remove Mold From Shower Curtain?

Use white vinegar to remove soap scum and mold from your plastic shower curtain. Natural mold and germ killers include vinegar.

Here are a few tips for cleaning your shower curtain more quickly. Although using your washing machine can give your shower curtain a more thorough clean, it may also limit its lifespan.

My shower curtain has black mold, how can I get it off?

You may still get mold off your shower curtain by treating it inside if washing it outside is impractical. To be safe, use the same cleaning supplies as above and make sure there is enough of airflow.

  • Lay the shower curtain in the tub after removing it.
  • On the shower curtain, mist a mixture of two parts hydrogen peroxide and one part water.
  • Give the hydrogen peroxide five to ten minutes to settle. Thoroughly rinse.
  • Scrub the mold with a baking soda paste until it disappears. As necessary, rinse and repeat. You should pay attention to the wrinkles along the folds and seams of your shower curtain as it isn’t laying flat.
  • Continue by flipping the shower curtain.
  • The shower curtain should be hung from the curtain rod to dry.

Do vinegar and shower curtains mix well?

There is a simple way to clean a shower curtain without taking it down if you need to quickly clean your shower or in between more thorough cleanings.

In a spray bottle, first combine one part white vinegar with four parts water. Spray the vinegar and water mixture on the side facing the tub after pulling the shower curtain closed to cover the entire tub or shower stall. Mold and soap scum will be broken down by the vinegar. Use a brush or sponge to help loosen soap, debris, and bacteria that cause odors if the lowest portion of your shower curtain is very dirty.

With a handheld shower head, a watering can, a bottle of water, or a bucket of water, rinse the shower curtain and liner from top to bottom. While washing and rinsing, make sure the curtain is still in the tub. To get rid of remaining aromas, finish with a few sprays of Fresh Wave Odor Removing Spray. To ensure thorough drying, keep the shower curtain fully closed.

How is shower curtain mold eliminated?

It’s disgusting to have mold and mildew in your home since they give out musty odors, can trigger allergies, and overall stink. As we offer training seminars on correct cleaning techniques, our skilled cleaners at Luce Home have had plenty of experience clearing up mold-infested areas in homes.

Here are some tried-and-true methods that our cleaners employ to get rid of mold on fabrics that you can utilize to remove the mold from your bathroom curtains. To ensure an uninterrupted wash cycle, remove the shower curtain rings before you begin cleaning.

Laundry Detergent Washing

Since mold spots are visible even when they are as little as a pixel, the majority of instances can be identified early. You can wash your cloth shower curtains in the washer or laundry with some regular laundry detergent if found early on and without much damage to your curtains.

The detergent will eliminate any spores that are still present and eliminate the mold and mildew stain or discoloration. Allow the curtains to wash normally in some warm water by setting the washing machine to the gentle cycle.

To avoid soap scum and to stop the mold spores from returning, make sure to thoroughly rinse your curtains before putting them back in your bathroom. You can make a mold-killing cleaning spray every now and then by mixing vinegar and water in a spray bottle. This will keep mold and mildew at bay.

Baking Soda and Hydrogen Peroxide Treatment

It would be preferable to treat the curtain stains first before tossing the curtain into the washing machine if there are noticeable stains from mold and mildew colonies. To eliminate mold and mildew spores and remove the stains, combine baking soda and hydrogen peroxide.

Make a paste out of the two ingredients, then combine thoroughly to use the combination. To kill mold at the roots, put the paste on both sides of the curtain where there are mold stains. Allow the mixture to stand for 15 to 30 minutes, or until the paste has dried.

The hydrogen peroxide adds a disinfectant and cleaning solution to the mixture, and baking soda is tiny enough to penetrate deeply into the fibers of your curtains. Together, they efficiently eliminate some mild mold colonies and prepare your curtain for cleaning in the washing machine. Put the curtain in your washer and proceed to wash it as usual.

Oxygen Bleach Treatment

Your best option for cleaning heavily mold-damaged drapes would be to bleach them with diluted bleach in a spray bottle. White curtains can be bleached without any issues, however colored curtains require a particular bleach that won’t remove the dye from the cloth.

Apply diluted bleach to the mold and mildew stains on white materials. Time you set up your washing machine, let the bleach sit for a while. In your washing machine, put the necessary amount of bleach in and then fill it with warm water. Throw your drapes in and wait for it to cycle. Make careful to run a rinse cycle to get rid of any remaining bleach.

Use the same procedure for colored materials, but instead of pouring the bleach immediately, you will need to soak the curtain in some color-safe bleach. Add bleach that is color-safe to the required volume of water in your washing machine. Throw the curtain in and give it 20 minutes to sit. Run a cycle to completely remove the mold stains, and then run a rinse cycle. Allow it to air dry.

PEVA and PVC Liners: Scrub with Vinegar

Polyethylene vinyl acetate (PEVA) and polyvinyl chloride (PVC) are used to make strong, waterproof plastic liners. The easiest technique to clean a plastic liner when you see dirt and mildew accumulation is with vinegar, which destroys mold and stops new outbreaks.

Spray the curtain until it is completely wet using a spray bottle filled with three parts water and one part white vinegar. After 10 to 15 minutes, clean it with a sponge and then rinse.

Polyester Liner: Wash in the Washing Machine

Fabric shower curtain liners are water-resistant and quick to dry because they are often made of 100% polyester. The nicest thing about cloth liners is that when they start to appear dirty, you simply toss them in the washing machine. Use your regular detergent and wash it on a warm heat. Add a tablespoon or two of white vinegar to the wash cycle for additional cleaning power.

Which is better for killing mold, vinegar or bleach?

When it comes to removing mold, vinegar is indisputable superior to bleach-based cleaning. Except in exceptional cases, the EPA does not advise using bleach to kill or eliminate mold. “A background amount of mold spores will typically persist following the application of bleach,” according to most experts.

According to ServiceMaster, bleach just destroys surface mold; it does not affect the membrane itself.

That implies that the mold will return. In fact, because the mold perceives the bleach as a “threat,” it will come back stronger. Mold membranes will bury themselves deeper into the surface when bleach is applied to porous materials like drywall or wood in order to avoid the chemical.

How is a plastic shower curtain cleaned of mold?

You will need to combine water and vinegar in the same ratios as our previous method in order to aid in the removal of mold from a plastic shower curtain. Spray the curtain with this solution, massage it with a sponge or cloth, and then allow it to air dry.

By combining vinegar and baking soda, you may increase the cleaning power of vinegar. The two substances combine chemically to produce a potent dirt-busting mixture. Just enough water should be added to a loose paste of baking soda to get the desired consistency. Then cover the shower curtain with the paste. Use a spray sprayer to apply a white vinegar solution next.

Pro tip: To make cleanup easier, hang your shower curtain inside the shower or bathtub while you wash it with vinegar and baking soda.

It might be preferable to use a different cleaning technique if the mold on your plastic shower curtain is really difficult to remove. Use a spray bottle to apply a solution of two parts hydrogen peroxide to one part water to the shower curtain. Prior to wiping it down with a cloth or sponge, let it sit for around 20 minutes.

Step 1: Remove the Curtain

Start by removing the shower rod’s curtain or liner. This requires some perseverance and work, especially if your curtain rod is holding both a liner and a fabric curtain. To stop the whole item from dropping, start at one end and work your way to the other. You’ll save yourself a headache this way. Remember to take out any rings or hooks that were used to secure the curtain to the rod as well.

Step 2: Place It in the Washing Machine

To assist scrub the curtain and keep it from adhering to the washing machine’s sides, toss a towel or two in the washer along with the liner.

Step 3: Add Detergent, Vinegar, and Baking Soda

Our experts advise adding half a cup of white vinegar and half a cup of baking soda to the load along with a few drops of mild detergent. White vinegar’s acidity will aid in removing any stains caused by hard water or soap scum, while baking soda serves as a deodorizer. Together, the two components fizz to produce a potent cleaning combination that is nevertheless gentle enough to preserve the integrity of your liner.

Step 4: Run on the Gentle Cycle

Next, run the machine on a moderate cycle while using cool or lukewarm (never hot) water. Make sure the washer is set to the maximum water setting (biggest load) and the calmest bin speed because too much agitation will cause the liner to shred.

Step 5: Remove the Curtain and Hang to Dry

As the load goes through the wash cycle, keep an eye on it. The curtain should then be removed just before it is finished to prevent wrinkles from the final spin and draining process. To ensure that the curtain dries completely, hang it up in a well-ventilated area (such as an outdoor area or a room with open windows).

To help it air out, dry more quickly, and reduce the possibility of bacterial, mold, or mildew growth, be sure to completely close your shower curtain and leave the bathroom door open after each usage.

How can the bottom of a shower curtain be kept clean?

1. Pour white vinegar and water into the spray bottle in equal parts, then liberally mist the shower curtain lining with the mixture.

2. Obtain the scrub brush and begin cleaning! You can thoroughly scrub each piece by holding the bottom of the curtain taut or supporting it with your hand behind the curtain.

3. Rinse the curtain well and look for any locations you might have missed.

If you’re cleaning by hand

Spray any areas where pink mold or apparent mildew stains are present with a 1:1 mixture of bleach and water while the curtain is still fastened to the rod. Give it 10 to 15 minutes to sit.

After that, take the curtain off and put it in a pail or bucket that can hold it. Liquid detergent, 1 tablespoon, is added. Fill the tub with warm water until the curtain is mostly submerged. With gloves on, massage the curtain to promote suds, paying special attention to the hem and any parts that are obviously unclean. If the shower curtain is really filthy, mix in a tablespoon more of bleach. Give it a 10-minute soak minimum.

Check for any leftover stains while wearing gloves. If stains still exist, apply a bleach solution, add a teaspoon of baking soda on top, and then scrub the stain aggressively.

Drain the tub while retaining the curtain inside for rinsing. To release suds, re-dunk the curtain in water and swish it around. Repeat the draining process until the water is clear. Utilizing a detachable shower head to directly spray the curtain while rinsing will expedite this procedure.

The curtain should be rehung and stretched out on the rod to air dry. You might choose to use a fan to hasten the drying process and prevent the growth of new mold.

Cleaning fabric shower curtains in the washing machine

Spray a 1:1 mixture of bleach and water on any places that have pink mold or apparent mildew while the curtain is still fastened to the rod. Give it ten minutes.

Put the shower curtain in your washing machine after removing it. Add detergent to the lowest load of laundry. typically less than 1 tablespoon, and, if desired, 1 tablespoon of bleach, as per the instructions for your washing machine. Use cold or warm water and run the machine through its standard cycle (warm water will aid disinfection).

The curtain should be rehung to air dry. The spin cycle eliminates the need to use the dryer, and air-drying will increase the curtain’s lifespan.

Which is worse, mildew or mold?

A specific type of mold or fungus is referred to as mildew. The general word “mildew” is frequently used to describe mold growth, which typically has a flat growth behavior.

All microscopic fungal species, known as molds, develop as multicellular filaments known as hyphae. Any organic material, including clothing, leather, paper, and the ceilings, walls, and floors of houses with moisture management issues, can support the growth of mold. Shower walls, windowsills, and other surfaces with high moisture content are frequently home to mildew. Molds come in a variety of species. They can emit a powerful musty smell in enclosed spaces like basements.

How frequently should my shower curtain be cleaned?

More frequently than you might anticipate. After all, you interact with your plastic liner or shower curtain on an almost regular basis. It should ideally be washed once each month. But you should aim to wash your plastic shower curtain at least once every three months. Four to twelve times a year isn’t actually that frequently, and now that you know how to wash a shower curtain, the procedure shouldn’t take very long.

Remember that a shower curtain may be cleaned to help keep soap scum off of it, but mildew is a different issue. Do not worry if you see mildew on your shower curtain, whether it is made of plastic or cloth. Use these advice to get rid of mildew on shower curtains so that you may have a peaceful bath.