Will Vinegar Remove Grout Haze?

When grout is laid, haze of the grout is a regular occurrence. When the water in grout dries up, the dried cement and minerals remain in the grout lines. Grout is composed of a variety of different minerals and cement mixed with water. The minerals that are left over after removing excess grout from the tile’s face are what cause the haze to linger on the surface. While the minerals on the tile are removed along with the cement, the haze is still present.

You will want to wait until the grout is cured to clean the haze left on the tiles.

Cleaning the haze can start as soon as 24 hours after the grout has dried and last for up to 10 days. Waiting more than 10 days will make the job much harder, thus it is not a smart idea. Simple white distilled vinegar, warm water, a pail, a scrubby sponge, and a mop are all you need to remove grout haze. In your bucket, first combine a solution of one part vinegar to four parts warm water. After that, mop up the floor’s haze. Some places could require a second or third mopping, while others would call for extra effort using the scrubby side of a sponge.

The grout haze should be easily removed by the white distilled vinegar. You can use a mixture of 1/2 cup vinegar, 1/2 cup ammonia, 1 cup baking soda, and 2 quarts of water to remove grout haze if for some reason it does not clear up or if you waited a little too long, or you can purchase a commercial haze cleaner from the market.

How can a tenacious grout haze be eliminated?

To complete the task, you have access to four key tools. The procedures listed above describe how to eliminate grout haze using:

  • cheesecloth and water,
  • a float for rubber grout,
  • diluted vinegar with a nylon scrub pad (only on porcelain or ceramic tile),
  • and a specialist grout haze cleaner.

Before you start removing grout haze…

  • Allow the grout to fully harden. Before attempting to clear any haze from your tile surface, make sure it is totally dry. Normally, this takes 24 hours. For the precise duration, check with your installation specialist or, if you did it yourself, the grout’s packing.
  • However, do not let the grout haze remain for more than 10 days. If you do, stronger, harsher removers can be needed.
  • Check to see if your grout is made of epoxy or not. Because of the greatest strength and stain-repellence of this type of grout, the haze that forms will be more difficult to get rid of. Most likely, you’ll need a commercial cleaning solution (see Method 4). If you have any queries about the ideal cleaner, get in touch with the producer of the grout.
  • Determine the tile’s substance. Additionally, this will affect the kind of cleaning you can employ. Porous stone and slate tiles shouldn’t be subjected to acidic cleansers like vinegar, but smooth ceramic and porcelain tiles can. This makes haze removal more challenging but still achievable. The best results come from utilizing a specialized cleaner.

METHOD 1: Remove grout haze with water and cheesecloth.

Put on rubber gloves to protect your hands and wet your cheesecloth (or terry cloth). Because too much water can harm grout, wring thoroughly. Next, use the damp cheesecloth or towel to wipe the tile surface. With the aid of this technique, the grout haze will be “reactivated, lifting it off the surface.

METHOD 2: If the damp cloth fails to lift the grout haze, break out the rubber grout float.

Homeowners who did their own grout installation can again dig into their toolbox: When removing haze, the rubber grout float that is used to press grout into tile fractures can be useful. It has a paddle-shaped handle with a flat, generally firm rubber pad at the end similar to a specialized squeegee (see on Amazon). The float’s soft edge should be able to drag the grout minerals that have become adhered to the tile surface as you pull the edge in your direction without damaging the tile or the newly installed grout. Continue until all of the smoke has been cleared.

Use a moist tiling sponge, which is a larger, denser version of the dish sponge, to go over the area once again.

Use terry cloth or cheesecloth to buff the entire region. Check your work once more: Check the tile’s surface with a flashlight to determine whether any streaky, dull residue is still present. Continue to Method 3 if all of the grout haze has not yet been eliminated.

METHOD 3: In some cases, you can enlist vinegar.

To get rid of grout haze on porcelain or ceramic tiles, try a vinegar solution. (This is not acceptable with slate or stone! Its acidity, which is useful for cutting through mineral and grease deposits, has the potential to harm these porous surfaces. Go to Method 4 now.) In a large spray bottle or bucket, combine one part white vinegar with four parts water. For enhanced strength, more vinegar can be used.

Use a mop or a soft nylon pad depending on the surface you need to clean. After using the vinegar-water combination, thoroughly rinse the area with clean water.

METHOD 4: Choose and use the right commercial product.

Before selecting a product, bear in mind the following two points:

  • Pick up a product made to tackle the more tenacious grout haze if your grout is epoxy-based (view on Amazon). Heck, even if your grout was not epoxy-based, using a commercial product to assist remove stubborn grout haze may be beneficial.
  • Always select a product made specifically for slate or stone if your tile is any of those materials.

Wear rubber gloves and a mask to protect your face whenever using a chemical cleaner. Carefully read and adhere to the product’s instructions. Before applying the product to your tile surface, you might want to mix it 50/50 with water: Apply your professional cleaner after softly misting the tile surface with water. Take a few minutes off.

To remove the grout haze, swirl the cleaner over the surface with a nylon scour pad. With a mop, remove any extra cleaner, and then thoroughly clean the area. Dry yourself off with a terry cloth or soft towel, then use a flashlight to double-check your work.

How long should vinegar be left on grout?

Lemon juice is a mild disinfectant that effectively removes grout stains when applied to the grout. White vinegar can also be used to clean grout without the use of chemicals. Simply fill the cap with vinegar and pour it over the soiled grout lines.

Give the vinegar or lemon juice 10 to 15 minutes to sit. Use a little brush or an old toothbrush to scrub after that.

Rinse the affected area, then pat or rag it dry.

Will vinegar get rid of dry grout?

Use a homemade vinegar solution to eliminate grout haze.

If the tile was installed within three days, mix one part distilled white vinegar with four parts warm water; if it had been five days or longer, mix two parts vinegar with three parts warm water.

How long can you keep tile covered in grout haze?

You must eliminate the haze that forms on the grout surface after the grout has dried. After the grout has dried, you shouldn’t wait more than three hours to remove the haze. Within three hours of the grout haze curing, you can remove it with the use of a clean, moist sponge. However, if you are unable to remove the grout haze, you must purchase a tile haze remover from a hardware or home improvement store.

What kind of cleaner do experts use on grout?

What tools do experts use to clean grout? A: Regardless of whether you believe it or not, the majority of professionals use a 1:1 mixture of white vinegar and water. In many cases, this approach outperforms specialized Ph-neutral grout cleaners. When used on grout, is hydrogen peroxide safe? A: Yes, grout may be cleaned using hydrogen peroxide, a natural, neutral cleaner. Grout can be thoroughly cleaned with oxygenated bleach, which is created by mixing hydrogen peroxide and baking soda. Does baking soda help grout to whiten? A: Yes, you can whiten grout by combining baking soda and water to create a potent solution.

Can vinegar damage tile?

Leave the vinegar under the sink when cleaning floors made of stone, concrete, or ceramic tile. Stone tiles will lose their protective sealant due to the acid in vinegar, just like with stone countertops, making them look dull and rendering the surface susceptible to etching and pitting. Do you have a stone tile floor? Did you spill a bottle of pickles? Clean it up right away. Pickle juice’s acidity can swiftly etch a spatter pattern and a ghostly image onto your floor. Polished concrete floors are subject to the same regulations. The protective seal layer will be removed by vinegar, leaving the floor prone to water damage, stains, and pitting.

Acid doesn’t really affect ceramic tile too much, but grout does. Regular vinegar cleaning of ceramic tile floors will eventually strip the grout’s protective components, which can cause discolouration and disintegration. Use a cleaner labeled “safe for stone” while mopping any type of stone flooring.

Does using vinegar on grout pose any risks?

Share on Facebook, Twitter, LinkedIn, Google+, Pinterest, Whatsapp, and email

Because automated copying is not supported by your browser, please pick the link in the text box, copy it, and then paste it where you need it.

The majority of cleaning supplies for the home aren’t made for tile and grout. In fact, using the incorrect domestic tile and grout cleaning and sealing procedure can damage your floor’s aesthetic appeal. Use of floor cleaners not intended for tile surfaces, such as those containing bleach, ammonia, soap, or acids, might result in this.

Your tile and grout will ultimately become damaged as a result of routine cleaning and the use of various cleaning agents, to the point where you will require expert assistance to restore the appearance of your flooring. Do you believe that you have taken extra care to maintain your stone or tile floors? Your routine upkeep may be etching your stone, depending on the type of stone. As debris, soap scum, and soapy water become adhered, your cleaning techniques can be causing more stains. Most people don’t think about the chemical makeup of the cleaning supplies they use, but they really should! You wouldn’t wash your dishes with perfumed hand soap or your hair with detergent, would you? In a similar vein, various surfaces call for various forms of maintenance. The most popular cleaning products are listed here, along with reasons why you should stay away from them.


One of the most frequently suggested “home remedy” types of cleaners for hardwood floors is vinegar. According to legend, vinegar removes filth without harming floors. The finish will actually lose its shine because of the acid in the vinegar’s acidity. Although vinegar is a popular cleaning product, we strongly advise against using it to clean your tile and grout since it may stain your flooring. In other words, use vinegar if you want your skin to seem dull and patchy.

abrasive cleansers

Hard stains are attacked and removed with acidic cleaners, which break them down and make them easier to remove. Acids, however, severely etch minerals-based stones like travertine. Cleaning agents with an acidic base can potentially harm your grout and tile. Etching can be undone, but it needs expensive re-polishing. The majority of common household cleansers contain acids.


You are not genuinely cleaning if you use bleach to “clean.” There seems to be a widespread misperception that bleach can be used for cleaning. In actuality, bleach lacks a cleaning agent and is so ineffective for cleaning. To reach its claims, bleach typically needs pre-cleaning, so you have to go through a two-step process. Studies have shown that sodium hypochlorite, a common bleach chemical found in products like Soft Scrub and Clorox, has the ability to gradually dissolve concrete, the primary component of most grout.


Ammonia is a typical cleaning chemical that can be found in many store-bought cleaners, including Lysol and Pledge. Additionally, it is obtainable as a standalone cleanser. Sadly, applying ammonia on a hardwood floor is almost identical to applying vinegar. Although it produces outcomes that are nearly identical to those of vinegar, ammonia has a somewhat different fragrance. The ammonia will harm the finish of your tile and grout in any scenario. Want a good idea? If you have pets, never use ammonia to clean up “pet accidents” because it smells like urine to them (particularly cats). The stench will make the animal confused and almost certainly cause them to urinate wherever you use it.