Will Baking Soda And Vinegar Clear A Clogged Drain?

To keep this kitchen device in good working order, cleaning the garbage disposal should be done on a regular basis, much as taking out the trash. To keep the waste disposal in good working order, take the following actions:

  • For one minute, run hot water.
  • Turn on the garbage disposal for a few seconds after pouring 1/4 cup of baking soda down the drain. Give baking soda 10 minutes to sit.
  • Vinegar, 1 cup, is added. Give the vinegar and baking soda mixture some time to bubble.
  • Run the garbage disposal for a short while more after giving it a hot water rinse.
  • 2 cups of ice and 1/2 cup of salt should be poured down the drain. Until the ice has disappeared, start the garbage disposal and run some cold water. Food scraps will be released by the ice and salt.
  • Slice some citrus peel (lemon, lime, orange or grapefruit). Fruit slices should be inserted one at a time into the garbage disposal while cold water is running. The fruit slices will leave a nice scent in your garbage disposal!

Whether particular foods clean or clog a garbage disposal is not always clear. Please heed our warning and steer clear of disposing of the following foods. Instead, use them as garden compost.

The idea that egg shells may sharpen garbage disposal blades is a widespread urban legend. It’s untrue. The grinders may get duller if the membrane on the interior of an egg shell sticks to them.

Coffee grounds are frequently put in the garbage disposal to get rid of odors. Coffee grounds can build up and plug drains, which is more harmful than they are to the garbage disposal.

What do artichokes, celery, onion skins, and corn husks all have in common? Their fibrous and stringy structure is ideal for blocking the motor of a garbage disposal by becoming tangled up in it.

When put through the garbage disposal, potatoes make a thick paste, whereas pasta and rice coat the blades with a sticky substance.

Grease and oil are dangerous for garbage disposals, pipes, and waste water treatment in the long run since they solidify at a specific temperature. When it comes to complete pipe and sewer blockage, fats are the worst offenders.

Cleaning a dishwasher may seem unnecessary, but regular cleaning can keep the equipment in good working order and increase its lifespan. As follows:

  • To reach the drain, remove the dishwasher’s bottom rack. Eliminate any food leftovers.
  • In an empty dishwasher, put a cup of vinegar on the highest rack and start the hot water cycle.
  • Run another hot water cycle after adding one cup of baking soda to the bottom of the dishwasher.

Once a month, we advise cleaning the dishwasher with vinegar and baking soda.

A partially clogged drain may just need a temporary remedy using baking soda and vinegar, but a completely blocked drain would need the assistance of a professional plumber. To make it easier for water to flow through the pipes, this solution will dissolve and push the sludge through them.

  • To warm up the pipes, let the hot water flow for a minute.
  • 1/2 cup of baking soda should be poured down the drain.
  • One cup of vinegar should be added, the drain should be covered with a bung, and fizzing should be heard after ten minutes.
  • Use extra hot water to rinse.

Until desired results are attained, repeat steps 1-3. It can require more than one attempt.

Preventing drain issues is the best course of action. Regular drain cleaning with baking soda and vinegar can completely stop the buildup of debris and obstructions, but for a better alternative, use the ARS/Rescue Rooter Network DrainRight Drain Maintainer.

Grease, soap scum, food residue, and other waste build-up are liquefied and dispersed by the unique mixture used to create DrainRight Drain Maintainer. Additionally, it deodorizes and cleans grease traps, vent lines, and drain lines. Since DrainRight Drain Maintainer is entirely biodegradable, neither your pipes nor the environment will be harmed. It’s safe to use on any kind of pipe or drain and isn’t acidic, caustic, corrosive, or any of those things.

Find your nearby ARS/Rescue Rooter location to make an online appointment for drain cleaning if you have seriously clogged drains that you are unable to clear on your own.

How Do I Unclog My Drain?

Victory! must be shouted as you smash the toughest blockages into mush and flush them down your pipes.

However, not every blockage calls for such fuss. Sometimes clearing odorous drain clogs and clearing drains only requires routine drain cleaning and a slight shove.

Introducing vinegar and baking soda. While they can sometimes clear clogs, Liquid-Plumr is your best option when home remedies fall short. Read on!

Step 4:

Step 3’s bubbling reaction between the baking soda and vinegar aids in unclogging the drain, and step 4’s boiling water aids in flushing the obstruction from your pipes.

A natural drain cleaner can be made using baking soda and vinegar. Are you ready to learn how it works scientifically?

The Science: How Baking Soda & Vinegar Help Unclog Drains

Sodium bicarbonate, or baking soda, is a base. Water and acetic acid, an acid (you guessed it), are the two main ingredients of vinegar.

Combining these causes a reaction in which molecules are exchanged, resulting in the production of carbon dioxide and water that bubble through the obstruction, dislodging it to produce loose material.

And unlike a regular water system, drainage pipes are not pressured. Pressure is increased when hot water is used to flush the drain. This pressure helps unclog drains and remove undesirable crap from pipes in addition to gravity.

Baking soda, vinegar, and boiling water can all be used to naturally clean drains, but you might need something more powerful, such as Liquid-Plumr, to completely clear out those very stubborn clogs.

Benefits of Using Baking Soda & Vinegar as a Drain Cleaner

The advantages of routine drain cleaning can help keep your drains clear of clogs, and over time, baking soda and vinegar may operate as a natural drain cleaner on weaker drain jams.

However, you might want to use a more potent drain cleaner, such as Liquid-Plumr, for stubborn drain clogs that need to be cleared right away.

Cleaning Tough Drain Clogs

Products from Liquid-Plumr can unclog stubborn drain clogs more effectively than home cures while still being safe to use in your pipes.

In order to help unclog difficult drains, Liquid-Plumr Clog Destroyer+ PipeguardTM has two potent liquids that, when mixed, produce a deep-cleaning foam that dissolves hair and odor throughout the whole pipe.

To efficiently dissolve the drain obstruction, the main active ingredients sodium hydroxide and sodium hypochlorite emit heat. That is pretty strong science, indeed!

Is it secure to use vinegar and baking soda to unclog a drain?

What if your plumbing system uses PVC pipes? Will using baking soda and white distilled vinegar to clean such pipes damage them?

No, is the response. In actuality, the safest and most efficient ways to clean pipes are vinegar and baking soda.

PVC pipes won’t be harmed by them, and they might even help maintain them clean and free of obstructions.

So feel free to use baking soda and vinegar to clear your drains if your home has PVC pipes.

Recipe For Using Baking Soda And Vinegar


Pour the vinegar and baking soda down the drain of an empty sink. Wait for at least an hour after plugging the drain. Pour a big pot of boiling water down the drain after unplugging the drain.

Do vinegar and baking soda dissolve hair?

Here are some ways you can use to clear that problem, whether you have a hair clog in your bathroom sink, shower, or tub drain.

Use Baking Soda and Vinegar

A particularly potent mixture that can help eliminate unpleasant hair clogs is baking soda and vinegar. Baking soda not only aids in the dissolution of hair in your drain but also has antifungal and antibacterial properties. Following are the instructions for using vinegar and baking soda to unclog drains:

  • Pour one cup of baking soda and then one cup of vinegar down the clogged drain. Fizzing will result from the chemical reaction caused by this.
  • Pour one liter of boiling water down the drain around ten minutes after the fizzing stops.
  • To check if the water is adequately draining, turn on the faucet.
  • Repeat the first three procedures if the drain is still clogged. For more difficult hair clogs, you might need to repeat the method multiple times.

Use Needle-Nose Pliers or a Wire Hanger

Using pliers or a wire hanger could be a wonderful way to pull hair out of the drain if your drain has a removable cover. You will require needle-nose pliers, rubber gloves, a screwdriver, and a flashlight for this.

  • Drain stopper should be removed. Use the screwdriver to remove the stopper if you are unable to do it manually.
  • Use a flashlight to locate the obstruction.
  • Put on your gloves and take out the needle-nose pliers to remove the hair clump.
  • Try using a wire hanger if the pliers can’t fit the drain or reach the obstruction. Just construct a hook at the end of a coat hanger after straightening it up. Find a hair clump, fish around for it in the drain, and pull it out.
  • Flush the drain with one liter of hot water after it is clear.

Use a Plumbing Snake

A plumbing snake, also referred to as an auger, is just a flexible, long wire or plastic tool used to rapidly and effectively unclog obstructions in drains. You can purchase one from your neighborhood hardware store if you don’t already have one. Depending on the intended usage, augers come in a wide variety of sizes and designs.

Here are some factors to think about while selecting an auger:

  • Augers are available in a few common lengths and cable thicknesses. A 25-foot cable that is at least 1/4 of an inch thick should work for the typical homeowner or renter who wishes to unclog a shower, tub, or sink. An auger with a 50-foot cable would be great to reach obstructions in longer pipes in multi-story homes with bathrooms upstairs.
  • Drain snake head style: There are two basic head designs for plumbing snakes: cutting heads and coil heads. You can seize hair clumps and remove them from the drain by using tools with coil or toothed heads. Cutting heads contain razor-sharp blades that easily remove any obstructions in a pipe.
  • Using manual augers, you push the snake down the drain, crank the handle to grab the obstruction, and then draw the snake out. The cable can be advanced and retracted by electric drain snakes with just the push of a button; this is a better approach to clearing out major clogs.

Although there are many different types of augers available, DrainShroom is the finest choice (but we admit, we might be biased). This ground-breaking clog buster, which costs only $14.99, attaches to any power drill and digs deep into your bathtub, shower, or bathroom sink drain. Here is more information about using drain snakes.

Use a Plunger

Some of the most popular household appliances for unclogging drains include plungers. There are several various types of plungers available, each made to work with a certain type of drain.

Use a sink or common plunger for drains in bathtubs, showers, or sinks. A rubber cup is attached to the end of a wooden or plastic handle on this type of plunger. Since the cup needs to sit flat over the drain, it works best on flat surfaces like a sink or bathtub.

Here’s how to unclog a drain using a plunger:

  • Plunge the drain while doing so.
  • Fill the tub, shower, or sink with water until the plunger is completely immersed.
  • In a brief period of time, pump the plunger up and down six or seven times.
  • To check if the water drains away, remove the plunger from the drain opening. If it doesn’t, try it again.
  • Pour one liter of water down the drain to rinse out any debris after the clog has been removed.

You can attempt a chemical drain cleaning if everything else fails. Green Gobbler, SuperFast Drain Cleaner, Liquid Fire, Drano Max Gel, and Pequa Drain Opener are a few of the most well-known goods. Make care you read and abide by the usage instructions. Don’t make the error of combining commercial or homemade cleaners with drain cleaners. An explosion or a hazardous gas could result from the chemical reaction.

If over-the-counter medications and chemical cleaners are ineffective, it’s time to call in expert plumbing services. They can clear even the toughest clogs consisting of hair, grease, soap scum, grime, and other material using their drain cleaning technology and gear. Pick a qualified, insured, and licensed plumber. Additionally, make sure to read consumer testimonies and reviews posted online.

Which homemade drain cleaner works the best?

This mixture of vinegar and baking soda (sodium bicarbonate) may be the greatest homemade drain cleaner available. Pull off the stopper in order to gain access to the drain if you need to unclog a tub or sink drain. After that, pour a saucepan of simmering water slowly down the drain. Pour half a cup of baking soda, then half a cup of vinegar.

To stop the mixture from leaking out, plug the drain stopper back in or, if you don’t have one, cover the drain with a cloth or duct tape. After letting the mixture set for 10 to 15 minutes, run hot water through your faucet for at least 30 seconds before clearing the drain with another pot of boiling water. If necessary, repeat this procedure.

Can a drain clog from using too much baking soda?

Typically, some of the baking soda is left in the pipe, which may actually exacerbate an already-existing clog if the reaction transforms it into a sludge that is difficult to remove by rinsing.

Does vinegar damage to PVC pipes?

Just a few of the articles we’ve published for you are listed here. However, you might have heard that vinegar isn’t always suitable for your plumbing pipes.

The short answer is that vinegar, when used sparingly as instructed in many online recipes, won’t damage your pipes. Regardless of the material—pex, pvc, copper, etc.—your pipes are composed of. Your water pipes won’t get damaged by vinegar.