Will Baking Soda And Vinegar Clean Concrete?

Grease stains can be removed with soda. Although it seems absurd, it is real. This is as a result of soda’s three main components.

  • Carbonic acid is another name for the substance carbonated water.
  • Acid phosphoric
  • Acidic citrous

The concrete’s grease can be removed using these three acids. For this technique, Coke is a common choice, although any beverage with these ingredients will work. Pour the soda out and let it sit for 15 to 30 minutes on the concrete. Depending on the stain’s size, you could use a mop, towels, or scrub brushes to remove the remaining cleaner and water.


In the case of tiny grease spills, this is advised. The solution should consist of some potent detergent mixed with water, a scrub brush, a sponge, and some good ol’ fashioned elbow grease.

Vinegar and Baking Soda

If you want to use a natural cleaner to clean concrete, vinegar or baking soda are good choices. While bleach or detergent might be useful for cleaning concrete, they can also be poisonous to plants. This is a solution if you’re worried about damaging neighbouring plant life while cleaning your concrete patio or walkway.

Simply combine liquid dish detergent with a small amount of water, vinegar, or baking soda in a spray container. Spray the mixture onto the concrete and give it a 30-minute to settle. Next, wash and dry your concrete.

Concrete Cleaner or Degreaser

Usually, concentrated alkaline soap is used to make concrete cleaners and degreasers. These will make the oil more pliable for simple cleanup. However, because they don’t dissolve the oil, they won’t be effective on concrete that has been discoloured for a long period. On porous concrete, this remedy works best.


Does your concrete require thorough cleaning in a significant area? Start mopping after adding roughly 3/4 cup of liquid bleach to a bucket of warm water. Prior to mopping up the bleach solution with a bucket of clean water, let the bleach solution sit for a few minutes.

It’s crucial to remember that you shouldn’t combine bleach with other home cleansers and that, in order to protect your hands from bleach, you should scrub with gloves on.

Will vinegar and baking soda harm concrete?

Depending on how you define “good,” a concrete cleaner may not meet your standards.

Home cures are an option if you want something that is healthy, natural, and free of chemicals. There is a different solution, though, if you don’t care about the chemical composition and just need anything to work.

A good cleaner effectively eliminates stains and disinfects surfaces without endangering them. For cleaning concrete, use vinegar, baking soda, bleach, or power washing. Choose diluted vinegar or baking soda for solutions free of chemicals. Consider using bleach if you need a quick fix.

The EPA has a useful information on what chemicals are safe and which ones you should avoid if you are concerned about product safety.

Can baking soda harm concrete?

Is it Safe to Use Baking Soda? Undoubtedly, baking soda is a natural product that works well for cleaning a variety of surfaces, including concrete. When used with water, it is environmentally safe and effectively removes grease and grime.

Can white vinegar be used to clean concrete?

A very efficient, green method to remove rust stains from concrete—even those that are decades old—involves white vinegar and a little brushing. White vinegar should be applied directly to the stain, allowed to soak in for 20 minutes, and then scrubbed with a stiff-bristled brush.

Then use clean water to thoroughly cleanse the area. Let dry, then repeat if necessary. If the stain is still there, the cleaning product of choice in the industry for removing rust stains from concrete floors is Singerman Laboratories’ Concrete Rust Remover.

Can vinegar damage concrete?

Is Vinegar Harmful to Concrete? Vinegar may be used to clean concrete without harming it. However, prolonged saturation of concrete will harm the cement that holds it together. Be cautious since vinegar will eventually dissolve the concrete itself.

Which cleaning works best on concrete?

Oil stains on the driveway, paint spills on the garage floor, and mildew stains on the foundation are some of the more difficult cleanup tasks. That’s because the majority of stains on concrete are caused by hard substances like paint, oil-based products, and living things like mould, mildew, and algae. Additionally, because concrete is porous and has a tendency to absorb these compounds, once they have deeply embedded themselves in the surface, they are very challenging to remove. The suitable cleanser for the work must be used, as well as the appropriate concrete cleaning technique.

The most effective concrete cleaners, both for liquid and dry solutions, go after stains that are deeply embedded. Due to the range of substances that can stain concrete, it is necessary to match the cleaning to the stain type. One of these things ought to be useful if you’re dealing with unclean concrete.

How can concrete be restored to its former glory?

Resurfacing your concrete driveway and steps is a wonderful place to start if you’re looking for a quick and simple solution to increase your kerb appeal.

First, we thoroughly clean your concrete. Then we perform quick fixes, including patching up chips and cracks.

The finish is the next step, and it might have a distinctive pattern or a range of colours.

By doing this, you can modify your concrete without having to start over. Additionally, resurfaced concrete will last longer and require less upkeep.

How is soiled concrete cleaned?

The ideal cleaning technique will vary depending on the type of mess you have, like with any home duty. You must deal with each stain separately if your concrete or cement has several.

What to Know Before You Start

While not an easy task, cleaning a soiled cement or concrete floor isn’t very time-consuming either. There are a few crucial points to bear in mind before you begin:

1. Don’t combine cleaning techniques. Combining various solvents can produce poisonous vapours and result in severe health issues. Give the floor enough time to completely dry in between treatments and treat each stain type separately. (Learn more about cleaning products that shouldn’t be mixed.)

2. Make use of good airflow. Open the doors if you’re working in the garage. Open windows if you’re working indoors. You risk spreading irritants that have soaked into the cement, in addition to a lot of dust. Guard your lungs. It’s a good idea to use a particulate respirator mask as well if you have asthma or allergies.

Materials You Need:

  • bread soda
  • Warm water
  • Dishwasher liquid
  • oxidised bleach (some stains)
  • Using clay kitty litter or cornstarch (some stains)
  • alcohol-based white vinegar (some stains)

General Cleaning for Dirty Cement

Clean the surface thoroughly before you start cleaning cement stains.

  • To get rid of the debris, sweep the surface with a push broom.
  • Rewet the surface and sprinkle it with oxygenated bleach to remove stubborn stains. In contrast to the chlorinated form, oxygen bleach won’t damage the plants that line your driveway or your grass. I employ OxiClean. Once more clean the area with the bristles of the broom, then let the oxygenated bleach in the area for 10 to 15 minutes.
  • Clean the area and your broom with water. Dry both completely in the air.

Removing Mold, Mildew, or Moss

Other organic debris cannot be cleaned of mould, moss, or cement with simple sweeping. You must eliminate the spores or plant matter that are the source of the mould stains on your cement before you can remove them.

  • Spray distilled white vinegar and hot water in equal portions on the moss stains on your cement.
  • After spraying, thoroughly scrub the area with the push broom.
  • After giving the area a thorough rinse with fresh water, let it completely dry.

Use a mixture of 1/4 cup oxygenated bleach and 1 gallon of hot water to remove particularly tough mould or mildew stains from cement. After 15 to 30 minutes, leave it in place, then rinse and dry the area.

Grease or Oil Stains

Your concrete floor may become slick if there has been an oil leak from a car, lawnmower, or other piece of machinery. Because cement is porous, you might discover that the oily mess has penetrated deep enough to produce a stain.

These oily cement stains can be removed, but you’ll need to be patient. In other words, using plenty of elbow grease to remove grease stains from your cement is the best solution. How? Read on.

  • Sprinkle the area liberally with baby powder, cornstarch, clay cat litter, or diatomaceous earth to absorb the surface spill. (I always have a bag of the latter on available to clean up cement stains and deter ants from entering the house.) All of these materials are very absorbent and can remove greasy messes from cement. However, you must apply a coating that is about a half-inch thick.
  • To lift the oil, let the powder stay in place for 24 hours. If you observe that the top layer is beginning to show oil, check it a few more times and add more powder. After a hard day, tidy up the chaos and throw everything away.
  • Then, in a bucket, combine 1 quart of extremely hot water with 1 teaspoon of liquid dish soap. (Adding 1/4 cup of Pine-Sol can be helpful; but, if you have pets, stay away from utilising pine oil products.)
  • Use a brush or broom to apply the mixture to the area and scrub it. After a thorough hot water rinse, let it air dry.

Removing Rust Stains

Your cement may only need to be scrubbed with a sharp brush and pure white vinegar if the rust stain is still quite recent. However, rinse thoroughly with fresh water afterwards since over time, undiluted vinegar will etch cement.

Get the area damp, then sprinkle it with an oxalic acid-containing product if the rust spots are larger or older. Bar Keeper’s Friend is what I use. This organic acid is powerful enough to dissolve rust yet gentle enough not to etch cement. Repeat this process until the stain is removed by using a firm brush to scrub the area and thorough rinsing.

How can I make my concrete white once more?

On the discoloured areas, use vinegar or bleach. Don’t dilute vinegar if you use it. Pour it onto the concrete and use a scrub brush to scrub it into the surface. Repeat if the stain begins to fade, and so on, until it is totally gone.

How can black stains be removed from concrete?

Utilizing a scrub brush, sponge the bleach solution over the stained surfaces. For five minutes, keep the affected areas damp by sponging on additional bleach solution as necessary to prevent drying. Next, give everything a good water rinse.

How can stains be removed from unsealed concrete?

After soaking, pour boiling water over the detergent. To remove the majority of the stain from the unsealed concrete, scrub the surface thoroughly with a hard brush. To get rid of the cleaning residue, mop with clear water.

How are stains on concrete removed?

Long-term accumulations of dirt and leaves on concrete can occasionally discolour it. These dark stains can be difficult to remove just like any other stain, especially if they are old. Do the following to remove these stains:

  • Sweep all dirt and debris away.
  • For bigger stains, combine water and liquid dishwashing soap in a bucket or spray bottle.
  • Apply a solution of detergent and water on the stain.
  • Give it 15 minutes to rest.
  • Use a gentle brush to scrub.
  • If necessary, rinse the area again.