How To Make Dawn Vinegar Cleaner?

You might have seen references to vinegar and Dawn dish soap as the ultimate cleaning remedy if you’ve ever searched for the newest cleaning tips and tricks on YouTube or Pinterest to make your Camden apartment sparkle. I make sure to keep this match made in heaven close by because it has long been a household need.

To make the solution straightforward and inexpensive! In a spray bottle, combine vinegar and Dawn in equal amounts. Shake gently, then liberally spray the area that needs cleaning.

I’ve discovered that using it to clean chrome shower and sink fixtures yields the finest results. To avoid scratching the fixture after spraying it, massage and wipe it with a microfiber cloth. Check out the pictures of my shower faucet and water valve from before and after!

A non-scratch dish wand sponge can be used for any necessary scrubbing in addition to combining the contents in a spray bottle.

You can warm the vinegar in the microwave before mixing it to give it a little extra potency if you have soap scum or stubborn deposits. Depending on how difficult the job is, spray the tub and shower thoroughly and let it sit for a few minutes to several hours. If necessary, scrub, but the scum ought to come off easily.

Be unconcerned with the overpowering vinegar smell. You’ll be pleasantly surprised to learn that it smells more like vinegar than Dawn!

Read our Simply Camden articles How Often Should I Clean This…and That?! if you’re seeking for additional cleaning advice to make your Camden apartment spotless. plus 7 Ways to Really Step Up Your Green Game!

Happy scrubbing! Be sure to follow the Simply Camden blog for additional advice on apartment living!

What is the Dawn to Vinegar ratio?

In a glass basin, combine 2 cups Dawn and 2 cups vinegar. Mix, microwave for 4 minutes, remove, and stir one more. Shake vigorously to thoroughly combine the mixture. Use on shower doors as required.

What is the purpose of the vinegar and Dawn cleaning solution?

You’ll also start to trust Dawn and vinegar! Sisters and Misters, it’s not simply the charming Mister who won my heart a long time ago that I’m in love with. Dawn and vinegar are a powerful combination that can replace half of the store-bought cleaning supplies you now have with only two basic, low-cost substances.

When I asked for further recommendations for DIY cleaners, a few Sisters and Misters praised this power couple in the comments and on Facebook, but they were utilizing it for different purposes. Sara then revealed that she cleans her floors with this combination. As a result, I began my research and discovered a ton of websites and Pinterest boards that suggested combining Dawn and vinegar in various percentages to clean nearly every nook and cranny of your house. Here are some of the ways I utilized it, all with excellent outcomes!

This pair is your new best friends if you have soap scum in your shower or tub. In a spray container, combine Dawn and vinegar in equal amounts by gently shaking. You can add a little extra strength by heating the vinegar in the microwave before combining if you have particularly difficult deposits. Depending on how gross the target is, spray liberally all over the tub or shower and let it sit for a few minutes to several hours. Because the spray is heavier, it sticks to the shower doors and walls rather than dripping directly down. If necessary, clean the surfaces after it has sat; otherwise, you’ll probably just be able to spritz it off and get sparkly surfaces. While it does smell a little while it’s sitting, I much enjoyed the vinegar fragrance to Scrubbing Bubbles’ foul chemical smell, and this performed much better! After rinsing, the vinegar scent has been mostly replaced with Dawn.

Use what is left over to clean the toilets after finishing the shower or tub. You can add more vinegar to clean the rest of the toilet after the thicker concentration has dried in the bowl. Additionally, vinegar contains some built-in antimicrobial qualities!

Can I combine Dawn dish soap with white vinegar?

All you have to do is microwave the vinegar, then combine it with the Dawn in a spray bottle by giving it a quick swirl. I’m done now!

(Discussing spray bottles.

One of the seven cleaning recipes included in this set of spray bottle labels in my store is the one that uses vinegar and Dawn. The labels not only fit perfectly on my beloved amber glass spray bottles, but they also provide the formula and the name of the cleaner, saving you the hassle of having to look it up again when you run out.

How Does It Work?

Dish soap and vinegar used together are quite powerful for a variety of reasons. First off, both ingredients work wonders at melting grit. However, dish soap is too thick to use as a spray, whereas vinegar alone will simply run off of most surfaces. However, when you combine them, you obtain a powerful, spray-able cleaner that adheres to any surface!

Simply spritz it on, let it sit for a little while, gently scrub, and then rinse. That’s all there is to it, and each time the results will astound you!

How Do You Use It?

There are several ways to use this cleaner; I usually put it in a spray bottle as mentioned above. Some folks favor keeping some in a dish wand similar to this one so it’s always available!

It’s also important to note that this particular cleaner is thick and sudsy. The walls of your bathtub or shower are ideal surfaces to use it on since they are simple to spray clean. I advise adding additional vinegar to your cleanser if you want to use it on other, less rinseable surfaces. For the new uses I’ve described below, a thinner mixture (about 1 part Dawn to 6 parts vinegar) will work best because it will be much simpler to rinse clean.

What is the vinegar and Dawn window washing solution?

Mix 1/4 cup of white vinegar and 1/2 teaspoon of liquid dish soap in a spray bottle. Add two cups of water to the solution, then vigorously shake the bottle to combine the ingredients. Lemon juice can be used in its place if you don’t have any white vinegar on hand. Lemon juice has a gentle acidity that cuts through grease and filth with the same flair as distilled white vinegar.

How can vinegar be used to create a multipurpose cleaner?

Pour vinegar and water into the spray bottle using the measuring cup. Shake to blend after sealing the top. The solution is now prepared to handle a variety of cleaning tasks around the house, but if the smell of vinegar bothers you, go to Step 2.


Choose up to three different essential oils to eliminate the vinegar odor. While your decision will likely be dependent on your own preferences for scents, keep in mind that some essential oils, such as lime, eucalyptus, tea tree, lavender, and peppermint, have antibacterial and antifungal characteristics that will give your cleaning solution an extra boost. Close the spray bottle after adding 10 to 12 drips total to the mixture, then shake it once more to combine.

On let everyone in the house know what’s inside, tape a label that reads “Household Cleaner” to the spray bottle.


Clean up! Apply a light mist of cleaner to the surface, and then use a microfiber cloth to scrub. This cloth scrubs vigorously yet softly to remove dirt without leaving behind lint. Repetition is required.

All of the Possibilities for Homemade All-Purpose Cleaner

Vinegar is a kid- and food-safe alternative because it is edible (it is the main component of salad dressing, among other things). Try applying it to:

  • Fridge and freezer: Clean the interior of your fridge and freezer, but don’t use vinegar on the rubber gaskets on the borders because it can corrode them.
  • Countertops made of laminate: Wipe up spills, especially those that have dried out.
  • Mirrors and windows: It will remove dirt, grease, and fingerprints.

How can homemade vinegar cleanser be made?

Making a homemade all-purpose cleaning solution with vinegar is a cheaper alternative to purchasing expensive store-bought surface cleansers. Simply combine two parts water, one part distilled white vinegar, and a splash of lemon juice. This homemade cleaner is effective on floors, in the bathroom, and in the kitchen. Just rinse with water after rinsing with baking soda to help whiten grout and sinks. Here are 14 creative uses for baking soda around the house.

How do you clean with vinegar and dish soap?

Surface cleaner with several uses: This mixture only takes a minute to prepare, and you may use it on almost every surface in your house. Use on hardwood floors and wood furniture, but make sure to properly dry wood surfaces after cleaning. Add white vinegar to one-third of the bottle and then top it out with tap water. After spraying your cleaner, the smell of vinegar begins to dissipate, but adding essential oils will help cover up any odor that may persist. Your favorite essential oil should be added at a minimum of three to five drops to the bottle. Lemon, orange, lavender, pine, and eucalyptus are some popular essential oils for cleaning solutions.

Mirror and window cleaner: Use the same solution of white vinegar and water to clean your mirrors and windows. But occasionally, a unique element could be required to shine through the fingerprints on your windows. Dish soap and vinegar are a powerful cleaning and smudge-cutting combination. 1/4 cup of white vinegar, 2 1/2 cups of water, and 1/2 teaspoon of dish soap should all be combined in a spray bottle. To remove any suds, thoroughly rinse windows and mirrors with clean water. With this mixture, cleaning windows and mirrors can turn into a perfumed chore. Apply this mixture to both interior and outdoor windows. Squeegees for windows work well. However, if you’d rather, use a lint-free cloth and wipe the windows in a Z-shape.

What must not be combined with vinegar?

One task that many of us despise is cleaning. You could have the impulse to start combining items in an effort to create the best cleaning solution when it comes to difficult messes and stains. Be aware of the potential risks to your health and your house when combining cleaning products before you transform your kitchen into a science experiment.

According to Brian Sansoni of the American Cleaning Institute, “don’t take chances when it comes to the safe usage of cleaning solutions.”

Mixing cleaning solutions can result in respiratory issues, skin, eye, throat, nose, and lung burns, as well as inflamed airways.

Although vinegar is a typical pantry item that many people use to clean their houses, you should pause before combining the acidic substance with the three items listed below. See how vinegar may be used around your home in 95 safe ways.

Hydrogen peroxide + vinegar

Although you might believe that mixing these two substances in one bottle will increase their cleaning effectiveness, doing so is more likely to raise your chance of visiting the ER. In fact, their combined power is considerable.” Peracetic acid is produced by mixing these two cleaning agents, according to Sansoni. “In high quantities, it is corrosive and irritating and can cause damage to your skin, eyes, nose, and throat. If you want to stop believing these 10 cleaning misconceptions, read this.

Bleach + vinegar

Bleach has a strong aroma on its own. However, after vinegar is added, the odor intensifies due to the production of chlorine and chloramine fumes, which might result in a chemical burn. Since many cleaning solutions contain bleach or ammonia, mixing them with vinegar can result in this reaction, hence Sansoni advises against mixing any cleaning products.

Baking soda + vinegar

When used in combination, these items lose their potential to thoroughly clean your property. Individually, each one of these products can readily clean a mess. When basic baking soda and acidic vinegar are combined and stored in a tight container, the result can literally be explosive. Because vinegar makes baking soda bubble and burst, this is the case. However, despite the two chemicals’ explosive nature, all that is really left is water and a small amount of sodium acetate, which is completely useless for cleaning surfaces. Make sure you are aware of the 17 genius uses for baking soda.

Sansoni advises double-checking the safety of the mixtures, listing all the contents on the container, and keeping the bottle out of the reach of children and animals if you choose to prepare a cleaning product from scratch. Additionally, always test a homemade item before utilizing it. His takeaway is that using designed cleaning products that come with instructions on safe and proper use and storage can save you a lot of time and hassle.

How do you combine all-purpose cleanser with Dawn?

  • 32-ounce spray bottle
  • Dawn Platinum Advanced Power Dishwashing Liquid, 2 teaspoons
  • One-fourth cup white vinegar
  • to fill water
  • Pour the appropriate amount of Dawn dishwashing liquid into the spray container.
  • The vinegar is then added.
  • Put water in the bottle.
  • Before each usage, give a good shake.

I pretty much solely use this homemade all-purpose cleaner, which only requires three ingredients, in my home. I use it to clean everything, including the bathrooms, kitchen, and other rooms. Use near children and animals is safe. It makes glass sparkle and doesn’t leave any residue.

How do I use vinegar and Dawn to clean my bathroom?


  • Pour hot vinegar into a spray bottle after heating it in the microwave.
  • Add Dawn dish soap. Put the lid on and give it a light shake to combine.
  • You now own a potent cleaning agent that can dissolve soap scum, remove buildup from the tub and shower, clean sinks, clean appliances, and clean just about anything.

How can vinegar and Dawn be used to clean shower doors?

The way your home’s water reacts with your soap causes many shower issues. Paraffin wax, which is frequently included in bar soap, reacts with hard water. While the soap removes the grime from your body, it leaves scum as a residue on the bathroom surfaces. Following a shower, the wax settles on the glass, forming a layer of scum that needs to be cleaned using cleaning supplies.

How to remove water spots from glass shower doors may be something you’re wondering because hard water leaves stains behind. Mineral deposits are left behind by the calcium that is naturally present in water when it evaporates. This element is challenging to adjust because having hard water relies on where you reside. However, you may quickly remove the hard water stains using items you already have at home. Additionally, you can employ a number of methods to reduce the quantity of spots in your shower.

The scum and spots in your shower can be cleaned up using common household items to bring back the shine to the glass. You might not need to spend a lot of money or go out and get a specific cleaning product for your shower because these cleaning chemicals are typically found in most homes. In your home, especially the shower, vinegar, ammonia, and baking soda are universally used as cleaning agents.

You will need to take care of your shower every day because you use it every day. Once a week deep cleaning and regular treatment of the shower glass are required to generate and maintain shine. Following are some of the ideal shower door cleaning techniques:

Use White Vinegar as a Shower Door Cleaner

Use of distilled white vinegar is a key cleaning tip for bathrooms. Vinegar is a cheap, easily accessible natural substitute for more expensive cleaning supplies. Even if you’ve never used vinegar to clean glass shower doors, it’s easy to figure out how to do it. However, avoid using vinegar in your shower if it has any stone because it could harm the stone.

Pour liquid dishwashing soap and warm white vinegar into a spray bottle in an equal ratio. On the door, mist the mixture, then wipe it off with a soft cloth or sponge. To make sure the sponge won’t scratch the glass, test it on a small patch first. Grease should be cut through by the soap, and vinegar aids in washing the residue away.

You may also try combining some tea tree oil with some undiluted white vinegar. The vinegar should assist in rinsing the soap away. Tea tree oil is known for having an antimicrobial effect and being safe to apply topically and around the house.

Vinegar can be used to remove the grime from sliding glass door tracks. White vinegar should be poured into the drain holes after covering them with paper towels. Let it operate all night. The following day, take off the paper and clean the vinegar residue.

Never use vinegar or ammonia with bleach to clean a shower in order to prevent the release of toxic gases.

Baking Soda Paste

Just enough water should be added to the baking soda to make a thick paste. For a shower door, start with a half cup of baking soda. If your shower enclosure is made of huge glass, use more. With a soft cloth, rub this paste onto the shower. Use vinegar to rinse it. If your shower is made of stone or travertine, avoid rinsing with vinegar.

You can also combine vinegar and baking soda to make a paste. Wait 20 minutes after applying this to your shower glass before rinsing it off.


Open the bathroom door to protect yourself when using ammonia to clean. Open any windows you have if you have them; if not, use the vent to create more airflow. To safeguard your hands when handling ammonia, put on some rubber gloves. Most importantly, never combine ammonia and bleach since the gases that result could be hazardous.

Use a spray bottle to mix three parts water to one part ammonia to remove thick scum from the shower. Spray the scum-covered glass and use a brush to scrub the surface while it’s still wet. Rinse well, then completely dry the surface.

If your shower glass doesn’t already have a significant buildup of soap scum, you can also combine two quarts of distilled water with two tablespoons of ammonia to create a streak-free shine. To avoid hard water stains, use distilled water. Spray the glass with this combination, then wait up to five minutes before cleaning. Utilize a dry microfiber towel to clean.

Lemon Juice

In a spray bottle, combine the juice of three lemons with a cup of distilled water for a more fragrant substitute for vinegar. To remove stains from the glass, spray the shower and wait five minutes before wiping the surface with a fresh microfiber cloth. With a clean cloth, completely dry the glass.

Dip the cut side of a lemon half in baking soda for an additional method of using lemon juice to clean your shower. On the glass, rub the lemon. Apply distilled water to the surface to rinse and dry. Apply a thin layer of lemon oil to the inside of the glass to reduce soapy buildup.


Borax blends effectively into a paste to clean your shower glass, just like baking soda does. Just enough water should be added to the borax to make a thick paste. The paste should be applied to your glass using a wet sponge. Rinse the area with distilled water, then dry it. In most stores, you can find borax in the laundry section.

Magic Eraser

Without the use of cleaning solutions, a Magic Eraser sponge’s special cleaning abilities may remove stains from surfaces. Use a moist Magic Eraser to clean the inside of your shower to get rid of gunk. Use one of these erasers right away after taking a shower if you know you’ll use it to clean your shower. Your shower’s warmth and residual water will aid the Magic Eraser in removing soap scum and grime.

Buff Off Heavy Soap Scum

You will have more work to do if you skip routine cleaning or if you move into a home where the previous owners disregarded the shower glass. You will need to exert extra force to remove a thick layer of soap scum from your shower door.

Remove the shower door and place it in a secure workspace. Utilize an auto buffer and brass polish or a comparable polishing product. Rent one for the day if you don’t already have it. Any scratches left behind by the scum on the glass are filled in using the tool and polish.