Will Vinegar And Baking Soda Unclog A Toilet?

You must quickly unclog a toilet since there are guests in the house! You will be grateful that you have this trick at your disposal for any party or event.

There is always a clogged toilet during a gathering every year. Why? This occurs “because during the major parties you may be cooking enormous amounts of food and/or you may have more guests,” according to the American Society of Plumbing Engineers. Your plumbing system will have to work harder than usual when both of these are together. A backed-up and clogged toilet might easily result from a house’s massive increase in bathroom usage, as well as perhaps a cheeky child who was discovered packing the toilet with paper.

Unclogging a toilet without a plunger or snake can be an easy task as long as you have two common household cleaners on hand. This baking soda and vinegar trick will keep you from getting caught with an out of order bathroom when you have dozens of people in your house.

When vinegar and baking soda are combined, a chemical reaction can occur that resembles an eruption. This chemical reaction can assist in unclogging your pipes and your toilet. Carefully follow the instructions below:

Step 1: Assess the severity of the clog:

Tip: You can add all of the baking soda and vinegar at once to clear a minor clog. You will need to add the chemicals gradually for a more severe backup.

Step 2: Fill the toilet bowl with baking soda

Start off with about 1/4 and 1/2 of a cup. Keep in mind that the reaction will be stronger the more baking soda you have.

Before moving on to the next step, wait a few minutes for the baking soda and vinegar to react.

Tip: As soon as the vinegar and baking soda combine, the reaction will begin to occur. Before the reaction starts to calm down, expect to see a significant quantity of foaming.

As many times as necessary to get the toilet functioning properly, repeat the aforementioned instructions. It could be necessary to hire a professional if you are unable to clear the toilet blockage on your own.


With more than 35 years of experience, we are licensed plumbers who provide plumbing services in the Tampa Bay area in New Port Richey, Palm Harbor, Tarpon Springs, Trinity, Clearwater, Dunedin, Port Richey, Westchase, Oldsmar, Odessa, Holiday, Land O Lakes, Citrus Park, Carrollwood, Lutz, Ozona, Crystal Beach, Safety Harbor, Belleair, East Lake, Keystone, and nearby areas.

How to Unclog a Toilet with Baking Soda and Vinegar

Try this wonderful tip after using a plunger to no avail and before calling a licensed plumber: Find some baking soda and vinegar (either white vinegar or apple cider vinegar) in your cupboard, and get ready to use some chemistry to unclog your toilet.

  • Check the water level in the bowl and make any necessary adjustments. Before you start the unclogging procedure, you should have the bowl about halfway full. If the water level is too low, fill the bowl halfway or even more with hot or boiling water. You will need to scoop some water out if the level is too high to avoid spills. Sorry! This experiment’s next phase will be more enjoyable.
  • Fill the bowl with one cup of baking soda.
  • One cup of vinegar should be added slowly to the bowl. Your bathroom floor could become soiled if you pour too quickly. Use your intuition; if it appears that one cup will result in excessive fizz, use less or pour more slowly.
  • Give the fizz at least 20 minutes to sit.
  • Check to see if it was successful.

The water level ought to drop once the obstruction has been removed. As the pressure fluctuates, bubbles could also be visible. It’s okay to flush the toilet to inspect your work if you see these indicators. (Be prepared to turn the water shut-off valve behind the toilet if your judgment was off.)

Start anew at step 1 and go through the procedure a few more times if the clog appears to still be there. Allowing the fizz mixture to sit overnight or combining this technique with plunging will work for more difficult blockages.

What can you put in a toilet to clear it of clogs?

Think about a chemical drain opener if you want to discover how to unclog a toilet without a plunger or auger. Over time, some goods or homemade remedies can dissolve a clog.

  • Solid waste can be liquefied by commercial enzyme waste removal products when used in accordance with manufacturer’s recommendations.
  • Pour one cup of baking soda, two cups of vinegar, and a half gallon of hot water into the toilet to make your own drain cleaner. Dish soap might also aid in removing some obstacles.
  • Allow the solution to sit in the toilet overnight after using either technique to check if the clog has been removed.

Make sure the commercial drain cleaner you use is designed for toilets if it contains corrosive chemicals, since certain products can harm the plumbing. When everything else fails, consider hiring a plumber.

Do vinegar and baking soda disintegrate toilet paper?

You are not permitted to flush toilet paper down the toilet in several nations. This is due to the fact that some toilet paper varieties are difficult to separate and frequently result in serious plumbing issues.

A clogged toilet is a surprise that is never pleasant to encounter. Fortunately, using common household items like baking soda, vinegar, liquid soap, or shampoo as well as equipment like a plunger and auger, you may quickly and easily clear a clogged toilet by dissolving the toilet paper.

Can you leave vinegar and baking soda in the toilet over night?

Allowing the fizz mixture to sit overnight or combining this technique with plunging will work for more difficult blockages. If your toilet is still stuck or keeps getting clogged, there could be a plumbing issue, such as mineral accumulation or pressure problems. inquire at the Mr.

How long can I leave vinegar in the toilet?

  • Don some rubber gloves.
  • The tank lid should be taken off and placed carefully on a floor cloth.
  • Pour white vinegar into the tank without draining the water, stopping at least an inch below the top rim.
  • For 12 hours, let the vinegar-water mixture sit to dissolve rust, mildew, and mineral deposits.
  • To get the vinegar out of the tank, flush the toilet a few times.
  • The water valve for the toilet is typically found close to the floor.
  • To fully empty the tank of water, flush the toilet once more.
  • To get rid of dirt and buildup, scrub the interior of the tank’s walls. To get rid of any rust, use a sponge to clean the metal components.
  • Spray an all-purpose cleaner on the interior walls of the toilet tank if the walls still appear to be unclean. Make sure the cleaner is safe to use on plastic and metal in addition to the toilet tank. Give it the recommended amount of time from the manufacturer, typically 5 to 10 minutes. Use a scrub brush to clean the walls.
  • Iterate as necessary.
  • Restart the water supply, give the toilet another flush, and check to see if the water is clear in the bowl and tank.
  • Switch out the tank cover.

Turn off the water valve, flush the toilet until the tank is empty, and then fill the tank with only vinegar (no water), letting it sit overnight, if the tank is very soiled or nasty. Move on to step 5 now.

How can a toilet that won’t plunge be unclogged?

The realization that your toilet is clogged is one of the most demoralizing experiences in life. It’s not just a hassle; it can also be downright messy. The last thing you probably want to do is to get up up and personal with your toilet.

Hopefully, a couple of plunger spins will be sufficient to restore functionality. But occasionally, the plunger just isn’t enough. To combat such obstinate clogs, we’ve listed a few solutions you might try in addition to using your plunger.

Bring a pair of gloves for each of these procedures. Toilet cleaning is a messy task.

Before You Start

The first and most important step in clearing a clogged toilet is to stop the flow of water unless you want your bathroom to develop into a dangerous lake of sewage. There is a water intake valve located behind the toilet tank. Cut the power. Alternately, check to make sure the flapper valve is tightly closed by reaching into the toilet tank. Make sure that the decision you make is the first one you make.

Try The Plunger First

The plunger should always be the first item you attempt before moving on to non-plunger solutions. Due to the suction created by the plunger, which frees any obstructions in the drain pipe, plungers are naturally excellent for unclogging toilets. In order to create a tight seal over the pipe, “plunge the plunger into the toilet. Several strong pushes and pulls are advised. It’s okay if it doesn’t work. There are many other possibilities we can explore.

If You Don’t Have A Plunger, Make One

Consider yourself among the courageous few if you complete this step because making your own plunger is not something you get to do every day. Remember that plungers function by creating a vacuum; you can replicate this action using two common household items, a sizable water bottle and a pair of scissors.

Empty the water out of a sizable (one liter) bottle. Don’t squander it; drink it or use it to water some plants. Put the bottle’s cap back on once you’re done. The bottom of the water bottle should then be cut off using your preferred pair of scissors. Put on your gloves and insert the water bottle’s bottom into the toilet pipe. You can pull and push the improvised plunger as many times as you like. It ought to unclog the toilet eventually.

Hot Water And Dish Soap

When the plunger approach doesn’t work, you should try a few chemical solutions that won’t harm your plumbing. With hot water and dish soap, we’ll begin. Make sure there isn’t a lot of water in the toilet bowl before using this approach (or the one after that). Which implies that you might need to physically drain some water.

Place a pot with a couple litres of water on the burner. You want water that is warm enough to, example, brew some tea, but not quite boiling. Dish soap should be squirted into the toilet bowl while the water is heating. Pour the water into the bowl after it’s prepared. Dish soap and the force of the hot water should help to clear any buildup in your pipes.

Vinegar And Baking Soda

The difference between this procedure and the one before is that you’ll be using vinegar and baking soda to produce a chemical reaction that should help release some of the dirt. Recall the volcanoes you built in science class in fourth grade?

A pot with hot water, a cup of baking soda, and a cup of vinegar are required. In the toilet bowl, add the baking soda. The vinegar is then added gradually to prevent spillage. The mixture ought to begin bubbling and fizzing right away. Allow the vinegar and baking soda to do their magic for twenty minutes. The water level in the toilet bowl should be decreasing with time. Add the saucepan of boiling water last.

Use A Drain Snake (Or Make Your Own)

Sometimes using a heavy instrument to drive the obstruction free is the only method to get rid of a tenacious clog. Use the drain snake you have at home if you have one. You may quickly create a DIY drain snake using an unwound wire hanger if you don’t have one or don’t want to go out of your way to purchase one.

Move the snake or hanger from side to side as you insert it as far as you can into the pipe. It ought to be simple to remove the barrier. Noting that there is a P-shaped bend in the pipe that a wire hanger might not be able to traverse, an actual drain snake will be more efficient if the obstruction is deep within the pipe.

“My Toilet Is Getting Clogged Constantly!

Every toilet will occasionally become clogged, but what if it happens to be your toilet all the time? Older homes can have pipes that have been covered in buildup for many years. Your pipes’ volume decreases over time, whether it’s due to hard water, mineral buildup, or coarse piping material that makes items stick.

Why does that matter? It implies that the condition of your toilet is somewhat indicative of the entire condition of your plumbing system. Your pipes may be at danger for even more significant issues, like leaks and bursts, if you experience an exceptionally high number of obstructions. Some leaks may go unnoticed for several weeks or even months, gradually causing harm to your house.

Will a clogged toilet eventually self-clean?

Will this toilet unclog itself? is undoubtedly a question you’ve asked yourself if you’ve ever been in a restroom with a clogged toilet and no plunger.

Usually, a clogged toilet will clear itself with time. The majority of obstructions in toilets are water-soluble, which means they eventually dissolve in the water. The pressure from a flush should be sufficient to unclog the pipes once the clog has had time to disintegrate.

Even while it might seem straightforward, there are a few additional details you should be aware of before leaving the poor clogged toilet to fend for itself. Let’s start now!

How to Unclog Your Toilet with a Plunger

Put some serious elbow grease and a plunger to use to unclog your clogged toilet the old-fashioned manner. Here are six simple techniques to fix a broken toilet quickly and easily:

  • If the toilet bowl is already completely full, manually remove enough water so that you can use the plunger without spilling or overflowing. To give your plunging technique some room, we suggest gently scooping out extra water using a small bowl or bucket.
  • Place the plunger carefully in the toilet bowl, lowering it gradually while allowing the air within to bubble out.
  • Create a tight seal all the way around the toilet bowl’s opening. You are now ready to force the obstruction from the pipe.
  • Start making a firm, up-and-down, straight dive into the toilet. The blockage should be removed by using the plunger to force the water that is already in the trapway and pipes of the toilet. You should notice a decrease in the water level in the toilet bowl if you effectively plunge the toilet.
  • One gallon of water should be gently poured into the toilet bowl from a big container. When the obstruction has been eliminated, the water level in the toilet bowl should decrease.
  • Pouring and plunging water repeatedly until the obstruction is removed is necessary if the water level does not decrease.